Amico, GoLift 400/700 Patient Lift Kit
Amico, GoLift 400/700 Patient Lift Kit
$4,285.00
The Amico GoLift 400/700 Patient Lift Kit is a compact ceiling lift system designed for safe and easy patient transfers. Weighing only 10 lbs., it supports up to 400 lbs. or 700 lbs., depending on the model. Its smooth surfaces support easy cleaning, while the touch hand control, LED indicators, quick-change battery, and portable design simplify daily use.
Amico GoLift 400/700 Patient Lift Kit
The Amico GoLift 400/700 Patient Lift Kit provides a compact and reliable solution for patient transfers and positioning. At only 10 lbs. (4.5 kg), the lift remains lightweight and portable. However, it can support up to 400 lbs. (181 kg) or 700 lbs. (318 kg), depending on the model.
Easy Operation and Patient Transfers
The GoLift uses a touch hand control for simple up and down movement. Additionally, LED indicators clearly show the lift's current status.
A quick-change battery design also makes routine service easier. Furthermore, the trolley system allows for quick installation and removal from the ceiling track.
Designed for Infection Control
Smooth edges and rounded corners help make the lift easier to clean. These features appear on the motor, carry bar, and hand control. As a result, there are fewer hard-to-clean areas where dirt may collect.
The red emergency strap also features a rubber material for easier cleaning and disinfection. Therefore, the GoLift supports the infection-control needs of healthcare and care environments.
GoLift 400/700 Features
- Wired hand control
- Quick-connect carry bar
- Quick-connect hand control
- Lightweight and portable design
- LED indicators
- Easy-to-clean surfaces
- Durable construction
- Easy service and maintenance
- Quick-change battery system
- Quick-release trolley design
Safety Features
The GoLift includes several safety features for both patients and caregivers. In addition, its soft start and stop system helps create smoother movement during transfers.
- Emergency stop
- Emergency lowering device
- Emergency manual lowering
- Upper limit detection
- Lower limit detection
- Slack tape sensor
- Free-fall brake with overspeed governor
- Low and dead battery alarms
- Soft start and stop
- Overload protection
GoLift 400 Kit Includes
The GO-LIFT-400 kit includes:
- GO-LIFT-400 GoLift 400 lbs. with 3.3Ah battery
- GO-LIFT-QR-TRLY-ASSY Quick Release Trolley Assembly
- GO-LIFT-PS-WALL-ASSY Power Supply Wall Assembly with charger cover
- CB-GO-LIFT-REG-2HK Regular GoLift Carry Bar, 4 Hook
GoLift 700 Kit Includes
The GO-LIFT-700 kit includes:
- GO-LIFT-700 GoLift 700 lbs. with 3.3Ah battery
- GO-LIFT-QR-TRLY-ASSY Quick Release Trolley Assembly
- GO-LIFT-PS-WALL-ASSY Power Supply Wall Assembly with charger cover
- CB-GO-LIFT-REG-2HK Regular GoLift Carry Bar, 4 Hook
Slings are sold separately.
GoLift Specifications
- Safe Working Load: GoLift 400 – 400 lbs. (181 kg); GoLift 700 – 700 lbs. (318 kg)
- Unit Weight: 10 lbs. (4.5 kg)
- Length: 7¾" (197 mm)
- Width: 7¾" (197 mm)
- Height: 4¼" (108 mm)
- Strap Length: 84" (2134 mm)
- Lift Case: Flame-retardant ABS
- Maximum Sound Level: Less than 55 dB
- Service Life: 10 years or 22,500 cycles
- Hand Control Protection Class: IPX4
Lifting Speed and Battery
The GoLift adjusts its lifting speed based on the load. For example, it reaches up to 2 inches per second without a load. At 150 lbs. (68 kg), the speed is 1.3 inches per second. Meanwhile, loads of 400 lbs. or 700 lbs. lift at approximately 1 inch per second.
The system uses high-capacity Nickel Metal Hydride (Ni-MH) batteries. The standard setup includes two 14.4V 3.3Ah batteries. Alternatively, two 14.4V 5Ah batteries are available as an option.
Charging takes approximately two to four hours. Moreover, battery performance will vary based on the load and operating conditions.
Approvals and Testing
The GoLift meets Can/CSA-C22.2 No. 60601-1:08 and UL 60601-1:08 requirements. Additionally, the system has been tested to ISO 10535-06 and CE requirements.
