- STATIC MODE – For individuals unable to tolerate a moving surface, the “static” mode provides constant low-pressure for comfortable pressure relief.
- ALTERNATION MODE – Cycle times can be set from 5-95 min. to best meet the treatment needs of each individual. Cells alternate in a 3:1 ratio so that the individual is always supported by 2/3 of the cells.
- AUTO-FIRM MODE – This feature provides, within seconds, a stable surface for patient transfers and nursing procedures (returns to alternation mode after 30 min. if auto-firm is not deactivated).
- SOFT/FIRM – 16 soft/firm settings are available for easy comfort adjustment. This allows the caregiver to fine tune therapeutic support and optimize comfort based on weight.
- AUTO ALARM – This will alert the caregiver in the event of a power failure, leaving bed, sensor disconnect and bottoming-out.
Mattress Specifications:
Weight Capacity | Up to 1000 lbs |
Inflated Dimension | 36″ x 80″ x 10″ (standard) *Also available in 48″ width |
Weight | 33 lbs (standard) |
Air Cell Material |
Polyurethane |
Cover Material | Quilted fabric with polyurethane coating |
Base Material |
Woven Polyester fabric with PVC backing |
Safety Standard | Meets open flame requirements (FCC 16 CFR 1633) |
Control Unit Specifications:
Inflation Time | Under 1 minute |
Functions | Alternation Cycle (5 – 20 min) 16 comfort levels; Auto Firm; Static Mode; Lock-out Capability; Fowler Function, Auto-Memory Reset; Low Air Loss |
Power Requirement | 100~240 volt, 50/60Hz, 5 Amp |
Size | 16.5″(L) x 6.7″(W) x 10.6″(H) |
Weight | 13.2 lbs |
Max. Air-flow | 1200 lpm |
Safety Std. | UL/cUL |
Warranty | 2 year warranty from the date of purchase against manufacturing defects |
Reviews
There are no reviews yet.